Theses/Dissertations from 2024
PCL and DMSO2 Composites as Biomaterials for Additive Manufacturing, Jae-Won Jang (Dissertation)
Theses/Dissertations from 2023
Real-time Length Sensing of Braided Pneumatic Actuator using IR Time-of-Flight Sensor, Luon B. Chung (Thesis)
Coriolis Forces on Wind Turbine Wakes within a Wind Farm, Natalie Violetta Frank (Thesis)
Surface Roughness Prediction in End Milling Processes Considering the Vibration of the Cutting Tool, Yubin Lee (Dissertation)
Comparing the Performance of Different Machine Learning Models in the Evaluation of Solder Joint Fatigue Life Under Thermal Cycling, Jason Scott Ross (Thesis)
Developing and Testing Low-Cost Air Cleaners for Safer Spaces During Wildfires, Brett William Stinson (Thesis)
Theses/Dissertations from 2022
Applying Biomimetic Passive Dynamics to a Quadruped Robot Leg, Emma Krnacik (Thesis)
Effectiveness of Air Pollution Mitigation Systems: Transport, Transformation, and Control of Ozone in the Indoor Environment, Pradeep Ramasubramanian (Dissertation)
A Three-Dimensional, Analytical Wind Turbine Wake Model: Flow Acceleration, Empirical Correlations, and Continuity, Zein Ahmad Sadek (Thesis)
Proper Orthogonal Decomposition of Reynolds and Dispersive Stresses in Turbulent Boundary Layers Over Multi-Scale Rough Patches, Catherine Virginia Spivey (Thesis)
Building a Turbulent Jet: Measuring/Modeling Lagrangian Dispersion, Particle Trajectory Dynamics and Intermittency, Bianca Fontanin Viggiano (Dissertation)
The Plant Water Management Experiments, Marc Benjamin Wasserman (Thesis)
Theses/Dissertations from 2021
Improved Predictive Modeling Techniques for Non-Linear Solder Material Behavior, Arman Millian Ahari (Thesis)
The Effect of Viscosity on The Puddle Dynamics in Low Gravity Environment, Taif Hamed Saleh Al Juboori (Dissertation)
Fixed Bottom Wind Turbine Wave-Wake Interaction, Ondrej Fercak (Thesis)
The Evaluation of Performance of Spindle Connector and its Finite Element Analysis, Suhyun Lee (Dissertation)
Building a Biomechanical Model of a Rat Forelimb, Joshua Nathaniel Eric Mak (Thesis)
An Analysis of Capillary Flow in Finite Length Interior Corners, Samuel Shaw Mohler (Thesis)
The Return to Anisotropy Across a Jet in Crossflow, Gregory P. Sakradse (Thesis)
Development of Graphene Synthesis and Characterization Techniques Toward CMOS Applications and Beyond, Otto Kno Zietz (Dissertation)
Theses/Dissertations from 2020
Entrainment Processes for a Jet in Cross-flow: the Quantification of Turbulent Contributions and their Importance on Accurate Modeling, Graham Asher Freedland (Dissertation)
Mechanics of Canopy Turbulence, Hawwa Falih Kadum (Dissertation)
The Optimization of Machining Parameters for Milling Operations by Using the Nelder Mead Simplex Method, Yubin Lee (Thesis)
A Numerical Investigation of Microgravity Evaporation, Daniel Peter Ringle (Thesis)
Dynamic Effects of Inertial Particles on the Wake Recovery of a Model Wind Turbine, Sarah E. Smith (Thesis)
Indoor Air Quality Impacts of a Woodstove Exchange Program in Washington County, Oregon, Matthew Forrest Survilo (Thesis)
Characterization of Inertial Particles in the Turbulent Wake of a Porous Disk, Kristin Nichole Travis (Thesis)
Droplet Ejections During Wet Lab Operations Aboard Spacecraft, Caleb Cushman Turner (Thesis)
Theses/Dissertations from 2019
Jet Rebound from Hydrophobic Substrates in Microgravity, Karl Jeffrey Theodore Cardin (Thesis)
Infinite Photovoltaic Solar Arrays: Considering Flux of Momentum and Heat Transfer, Andrew D. S. Glick (Thesis)
The Optimized Synthesis of Copper Nanowire for High-quality and Fabrication of Core-Shell Nanowire, Suhyun Lee (Thesis)
A Study of Thermal Energy Storage of Phase Change Materials: Thermophysical Properties and Numerical Simulations, Kyung-Eun Min (Dissertation)
Tracking Center of Mass with Limited Inertial Measurement Units, Connor Nathaniel Morrow (Thesis)
Passive Separation of Binary Fluid Mixtures in Microchannels Using Lattice Boltzmann Method, Mohanad Kamil Radhi (Dissertation)
Non-Contact Distillation, Rawand Muzafar Rasheed (Thesis)
Design of a Canine Inspired Quadruped Robot as a Platform for Synthetic Neural Network Control, Cody Warren Scharzenberger (Thesis)
Characterizing Tilt Effects on Wind Plants, Ryan Scott (Thesis)
Capillary Migration of Large Confined Drops in Non-wetting Wedges, Logan John Torres (Thesis)
Fatigue Characteristics of New ECO Series Aluminum 7175 Alloy, Chinh Q.L. Vu (Dissertation)
Theses/Dissertations from 2018
Thermally (Un-) Stratified Wind Plants: Stochastic and Data-Driven Reduced Order Descriptions/Modeling, Naseem Kamil Ali (Dissertation)
Wind Energy and Wind-Energy-Inspired Turbulent Wakes: Modulation of Structures, Mechanisms and Flow Regimes, Elizabeth H. Camp (Dissertation)
Relationship between Anisotropy and Dispersive Stress in Wind Plants with Variable Spacing, Tamara S. Dib (Thesis)
Emulating Balance Control Observed in Human Test Subjects with a Neural Network, Wade William Hilts (Thesis)
Carbon-Supported Transition Metal Nanoparticles for Catalytic and Electromagnetic Applications, Kavita Meduri (Dissertation)
Mechanisms and Identification of Unsteady Separation Development and Remediation, Matthew Scott Melius (Dissertation)
Chemo-Thermo Cure of Viscoelastic Materials for Semiconductor Packaging Applications, Anjali Pradeep Kumar (Thesis)
Stress Analysis of Embedded Devices Under Thermal Cycling, Sadhana Radhakrishnan (Thesis)
Ozone-Surface Exchange and Transport and Transformation Near Ventilation Air Supply, Pradeep Ramasubramanian (Thesis)
Design Optimization for a CNC Machine, Alin Resiga (Thesis)
Electro-Drop Bouncing in Low-Gravity, Erin Stivers Schmidt (Thesis)
Biomimetic Design and Construction of a Bipedal Walking Robot, Alexander Gabriel Steele (Thesis)
Novel 2D Structure Nanomaterials Synthesis and IR Absorption, Suming Wang (Thesis)
Reliability of Solder Joints in Embedded Packages Using Finite Element Methods, Valeri Aisha Yunusa (Thesis)
Theses/Dissertations from 2017
Ozone Interaction with Indoor Building Materials and HVAC Filters, Omed Akber Abbass (Dissertation)
Building Energy Model Calibration for Retrofit Decision Making, Nicolas R. Johnson (Thesis)
Assessing a Fluorescence Spectroscopy Method for In-Situ Microbial Drinking Water Quality, Taylor Jeffery Sharpe (Thesis)
Microstructure and Mechanical Properties of Additive Manufacturing Titanium Alloys After Thermal Processing, Ahmet Alptug Tanrikulu (Thesis)
Reduced Order Description of Experimental Two-Phase Pipe Flows: Characterization of Flow Structures and Dynamics via Proper Orthogonal Decomposition, Bianca Fontanin Viggiano (Thesis)
Theses/Dissertations from 2016
Development of 3D Accelerometer Testing System, Mohammed Abbas Soudai Alsaedi (Thesis)
Unmanned Aerial Vehicle Based Structure from Motion Biomass Inventory Estimates, Emily Jane Bedell (Thesis)
Investigation of Jet Dynamics in Cross-Flow: Quantifying Volcanic Plume Behavior, Graham Freedland (Thesis)
Wake Character in the Wind Turbine Array: (Dis-)Organization, Spatial and Dynamic Evolution and Low-dimensional Modeling, Nicholas Michael Hamilton (Dissertation)
Large Length Scale Capillary Fluidics: From Jumping Bubbles to Drinking in Space, Andrew Paul Wollman (Dissertation)
Theses/Dissertations from 2015
Constant Interface Temperature Reliability Assessment Method: An Alternative Method for Testing Thermal Interface Material in Products, Christian Amoah-Kusi (Thesis)
Vortex Identification in the Wake of a Wind Turbine Array, Aleksandr Sergeyevich Aseyev (Thesis)
Analysis of Capillary Flow in Interior Corners : Perturbed Power Law Similarity Solutions, Joshua Thomas McCraney (Thesis)
Measuring the Effect of Vegetated Roofs on the Performance of Photovoltaic Panels in Combined Systems, Hamid Hawi Kadham Ogaili (Thesis)
Sensible Air to Air Heat Recovery Strategies in a Passive House, Santiago Martin Rodriguez-Anderson (Thesis)
A Study of Microwave curing of Underfill using Open and Closed microwave ovens, Aditya Thakare (Thesis)
Theses/Dissertations from 2014
Anisotropy of the Reynolds Stress Tensor in the Wakes of Counter-Rotating Wind Turbine Arrays, Nicholas Michael Hamilton (Thesis)
Impact of Sustainable Cool Roof Technology on Building Energy Consumption, Prem Kiran Vuppuluri (Thesis)
Stress Analysis for Chip Scale Packages with Embedded Active Devices under Thermal Cycling, Hyunwook Yeo (Thesis)
Theses/Dissertations from 2013
Capillary Phenomena: Investigations in Compressed Bubble Migration, Geometric Wetting, and Blade-Bound Droplet Stability, William Henry Blackmore (Thesis)
Solid State Pre-Formed Electronics Adhesive (SPEA), Alexander Randon Cope (Thesis)
A Parametric Study on Power Variation for Model Wind Turbine Arrays, Dominic DeLucia (Thesis)
Evaluation of Phase Change Materials for Cooling in a Super-Insulated Passive House, Jeffrey Stephen Lauck (Thesis)
Identification of Markov Processes within a Wind Turbine Array Boundary Layer, Matthew Scott Melius (Thesis)
Development of Dynamic Thermal Performance Metrics for Eco-roof Systems, Seth Sinclair Moody (Thesis)
Theses/Dissertations from 2012
Silk Cryogels for Microfluidics, Christopher David Hinojosa (Thesis)
Capillarity-Driven Droplet Ejection, Andrew Paul Wollman (Thesis)
Theses/Dissertations from 2011
Phase Change Materials as a Thermal Storage Device for Passive Houses, Kevin Ryan Campbell (Thesis)
Effects of Evaporative Cooling in the Thermal Performance of Green Roofs, Giorgina Beatriz Castillo Garcia (Thesis)
The Influence of Ambient Temperature on Green Roof R-values, Bryce Kevin Cox (Thesis)
A Feasibility Study of Model-Based Natural Ventilation Control in a Midrise Student Dormitory Building, Steven James Gross (Thesis)
Prediction of Soil Layer R-Value Dependence on Moisture Content, Ziyang Liu (Thesis)
Modeling the Impact of Roof Reflectivity, Integrated Photovoltaic Panels and Green Roof Systems on the Summertime Heat Island, Adam Scherba (Thesis)
High Resolution Measurements near a Moving Contact Line using µPIV, Jeremiah D. Zimmerman (Thesis)
Theses/Dissertations from 2010
Quasi Steady Capillary Corner Flow, John Alex Baker (Thesis)
Exploratory Eddy Covariance Measurements of Surface Heat and CO2 Fluxes in the Roughness Sublayer of an Urban Environment, Benjamin F. Burnett (Thesis)
The MicroPIVOT : an Integrated Particle Image Velocimeter and Optical Tweezers Instrument for Microscale Investigations, Nathalie Neve de Mevergnies (Dissertation)
Theses/Dissertations from 2007
Using Building Energy Simulation and Geospatial Modeling Techniques in Determine High Resolution Building Sector Energy Consumption Profiles, Shem C. Heiple (Thesis)
Theses/Dissertations from 2001
Dynamic Characterization of Aluminum Softball Bats, Danny V. Lee (Thesis)
Theses/Dissertations from 1998
Communicating Conceptual Design of Mechatronic Systems, Muir Lee Harding (Thesis)
Theses/Dissertations from 1997
Tool Condition Monitoring: A Computational Approach, Anthony Clinch (Thesis)
Limitations of Methods for Determining the Position of The Center of Mass of a Human Subject Performing a Sit-up, Terrence Chadwick Smith (Thesis)
Theses/Dissertations from 1995
Malt Drying Model Verification for Efficiency Improvement, John David Kribs (Thesis)
Theses/Dissertations from 1993
Quasi-Static Deflection Compensation Control of Flexible Manipulator, Jingbin Feng (Thesis)
Theses/Dissertations from 1992
Effectiveness of Additive Correction Multigrid in Numerical Heat Transfer Analysis when Implemented on an Intel IPSC2, James D. Padgett (Thesis)
Hypoid gear optimization, Selvaraj Ramachandran (Thesis)
Theses/Dissertations from 1991
Development of an Advisory System for Indoor Radon Mitigation, Patricia Hiromi Byrne (Thesis)