Flexural Strengthening of RC Columns with EB-CFRP Sheets and NSM-CFRP Rods and Ropes

Published In

Composite Structures

Document Type

Citation

Publication Date

12-1-2022

Abstract

Externally bonded (EB) and near-surface-mounted (NSM) systems have been investigated in the literature to be used in flexural strengthening of reinforced concrete (RC) columns. Research has shown that NSM-FRP systems are preferred in most cases over the use of EB-FRP systems especially in flexural strengthening RC columns against lateral loads. However, limited studies have been conducted to accurately compare the behavior of columns strengthened with EB-FRP or NSM-FRP systems. In this study, six specimens were fabricated and tested. To add to the novelty of this investigation, CFRP ropes were used for the first time in flexural strengthening of RC columns against cyclic lateral loads. Two of the columns were strengthened with NSM-CFRP ropes, one with NSM-CFRP rods, one with EB-CFRP sheet, and one with CFRP lateral confinement only. The results showed that both EB-CFRP and NSM-CFRP techniques can improve the flexural resistance of RC columns. The percentage of enhancement in lateral resistance ranged from 35% to 60%. Limited slippage of NSM-CFRP rods was an advantage and led to a more ductile response. Finally, theoretical analyses were performed to predict the lateral response of strengthened RC columns. The predicted load–displacement relationships had good agreement with the experimental results.

Rights

© 2022 Elsevier Ltd. All rights reserved.

DOI

10.1016/j.compstruct.2022.116236

Persistent Identifier

https://archives.pdx.edu/ds/psu/38662

Share

COinS